NEWS|TOK inc.

2022 NEWS

NEWS BACKNUMBER :

November 18, 2022 NEWS RELEASE

Notice : New year's holidays

Our office will be closed from Dec. 29th to Jan. 4th due to New year's holidays.

Thank you for your cooperation.

November 1, 2022 NEWS RELEASE

Some products in TLA series discontinuation notice

To Whom It May Concern

Our torque limiters have been developed with the times, and currently, we have produced the spring friction type of TLD series and magnet type (hysteresis coupling) of TLEU series to replace TLA series.

About 30 years have passed since TLA series was developed. Demand for TLA series has decreased significantly with the switch to successor products, and the mold for parts is aging, so we have decided to discontinue the production of some products in TLA series. The discontinued products are shown in the attached list. 

For the discontinued products, we accept final batch production with a deadline of December 23, 2022. If you have any requests, please feel free to contact the person in charge. 

Thank you for using TLA series and considering switch to TLD series and TLEU series.

Regards,

President, Keisuke Yoshikawa
Mechanical Core Parts Div General Manager, Junichiro Akiba

Please click here to view the list of discontinued products.

October 14, 2022 NEWS RELEASE

Notice of TOK China Factory Holidays for Chinese New Year

The Chinese New Year in 2023 is January 22, which is earlier than before.
Therefore, our Shenzhen factory and Shanghai factory will be closed from the middle of January to the beginning of February in 2023.
Also, Yamanashi factory manufacture some products using parts made in China.
We would appreciate it if you would consider to order in advance.

September 6, 2022 NEWS RELEASE

New rotary damper website launching now

new rotary damper website

We are excited to announce the launch of our new rotary damper website. The new website is extremely informative and user-friendly so you can find your desired rotary dampers easily. Some of the new features of this new website include:

New support for product selection
1.
Products can be selected by motion, torque, and size.
2. You can select from 12 features, such as rotary dampers
with gears and hinge types.
3. The required torque can be
automatically calculated.
4. You can select a product from
4 types of movement.

Technical information
1. You can easily understand
what a rotary damper is.
2. The
rotary damper selection guide explains the direction of motion, torque, and                                                                                      design of rotary dampers.
                                                                             
 3. You can see an example of motion of the rotary damper and application in the GIF                                                                                                  animation.
                                                                             
 4. The video explains how to install the rotary damper.

                                                                             
 We will keep the articles to learn more about rotary dampers updated, too.
                                                                              
 Visit our new rotary damper website today and hope you enjoy it!

July 5, 2022 NEWS RELEASE

Notice : Summer holidays

Our office will be closed from 11th to 21st August due to summer holidays.

Thank you for your cooperation.

June 10, 2022 NEWS RELEASE

TOK Shanghai factory operation status in connection with lockdown (fifth report)

To Whom It May Concern

We report the operating status of our Shanghai factory as of June 10, 2022.

As reported, TOK Shanghai Factory resumed normal operation from June 5, and the current operating rate is 96% of normal operation. The number of infected people in Shanghai has been declining since peaking on April 13.

At Shanghai factory, inventory shipments are being started in sequence, but due to the cumulative delay in shipping services, logistics delays have become a normal for about 1 to 2 weeks compared to normal times.

Also, Shanghai factory will be closed on June 11 and 12 because it is necessary to get tested for a simultaneous PCR test for each ward, but it will be in normal operation from June 13. There are concerns about restrictions on factory operations due to changes in the infection situation, and it will take time for stable production and logistics, but we will sincerely deal with them for an early recovery. We would like to express our sincere gratitude for your understanding and cooperation in the long-term non operation of the factory.

With the above, we will end the report on the operating status of the Shanghai factory.
If the situation changes significantly, we will report it again.

We look forward to your continued patronage of our company.

Regards,

President, Keisuke Yoshikawa
Mechanical Core Parts Div General Manager, Junichiro Akiba

Please click here to view the list of products made in Shanghai. 

June 3, 2022 NEWS RELEASE

TOK Shanghai factory operation status in connection with lockdown (fourth report)

To Whom It May Concern

We report the operating status of our Shanghai factory as of June 3, 2022.

As reported, the lockdown in Shanghai for the purpose of preventing coronavirus infection has been lifted on June 1, but permission to go out is about 90% of the total population of the city, and there are restrictions on factory operation.
At TOK Shanghai factory, the close control was lifted at finish time on June 2, and the factory-based staff returned home for the first time in a month. After the holidays on June 3 (public holiday) and 4 (Including factory reorganization and reattendance procedures), normal operation is scheduled to resume from June 5.
The occupancy rate forecast after June 6 (Monday) is unclear. The reason is that employees living in medium and high risk areas are not allowed to come to work and do not reach full operation. However, as logistics are gradually starting to active, we will start shipping inventories at the factory.
In the future, it is expected that we will receive a lot of inquiries regarding the delivery date , but we will inform you as soon as we can confirm the situation.

The next update is scheduled around June 10.

Regards,

President, Keisuke Yoshikawa
Mechanical Core Parts Div General Manager, Junichiro Akiba

Please click here to view the list of products made in Shanghai. 

May 20, 2022 NEWS RELEASE

TOK Shanghai factory operation status in connection with lockdown (third report)

To Whom It May Concern 

We report the operating status of our Shanghai factory as of May 20, 2022. 

Lockdown in Shanghai for the purpose of preventing coronavirus infection is ongoing, and the prospect of lifting is unclear and the situation has not been improved compared with 10 days ago. The operating rate of Shanghai factory has slightly increased and it is about 20% to 30%. Although we are forced to close control (do not go home after entering the factory and profibit from contacting with the outside), our factory does not have the accomodations so the sleeping is the minimum conditions that meets administrative guidances. It is difficult to allocate more employees in the factory when we consider to secure an area for their rest and sleeping. Therefore, we do not expect to significant increase of the operating rate unless the close control of area, town, community which they live in and factory. 

On the other hand, management staffs have switched gradually to work from home and improved the work situation day by day. We cannot answer the delivery time at present but we will continue to monitor the logistics situations and once operating situation is improved, we will arrange the shipment soon. 

We ask for your continued cooperation in adjusting product delivery dates. 
Also, our Shenzhen factory continues to operate relatively stably.

The next update is scheduled around June 3.
We look forward to your continued patronage of our products. 

Regards, 

President, Keisuke Yoshikawa
Mechanical Core Parts Div General Manager, Junichiro Akiba

Please click here to view the list of products made in Shanghai. 

May 10, 2022 NEWS RELEASE

TOK Shanghai factory operation status in connection with lockdown (second report)

To Whom It May Concern

 We report the operating status of our Shanghai factory as of May 10, 2022. 

 Lockdown in Shanghai for the purpose of preventing coronavirus infection is ongoing, and the prospect of lifting is unclear. However, TOK Shanghai factory was registered in the Whitelist of Epidemic Prevention Reconstruction Companies in Songjiang District, Shanghai, and was licensed on the premise of closure management (no return from the factory and no contact with the outside). Employees can now obtain a work resumption certificate, but if area, town, community which employee live in continues closure management, they will not be able to return to work, so the current factory utiization is about 10%. 

 We are promoting effort to the factory utilization and teleworking for production management staff, but it is difficult to say for certain when the product can be exported currently due to changes in regulations every day. 

 We ask for your continued cooperation in adjusting product delivery dates.
 Also, our Shenzhen factory continues to operate relatively stably.

 The next update is scheduled around May 20.
 We look forward to your continued patronage of our products. 

 Regards, 

President, Keisuke Yoshikawa
Mechanical Core Parts Div General Manager, Junichiro Akiba

Please click here to view the list of products made in Shanghai. 

April 20, 2022 NEWS RELEASE

TOK Shanghai factory operation status in connection with lockdown (first report)

To Whom It May Concern

 Due to a lockdown in Shanghai aimed at preventing coronavirus infection, our Shanghai factory has been placed under a closedown status. According to local information, no one at our Shanghai factory is infected, but due to an outbreak of infection on April 14 in the area where the factory is located, employees are not allowed to enter the factory until the end of this month, and it is difficult to make any plans for May and beyond. 

 As of today, Shanghai is prohibited from moving outside the sub-district except food-related logistics. Therefore, we anticipate that there will be disruptions in transportation after the lockdown is lifted, and deliveries of our products are expected to be delayed by approximately two months. 

 We apologize for any inconvenience this may cause, but we would appreciate your cooperation in adjusting product delivery dates in consideration of the current situation. 

 TOK would like to announce for your reference, the Shenzhen factory is currently in operation, although it was suspended following a PCR inspection in the Shenzhen area in March.

 The next update is scheduled around May 10.
 We look forward to your continued patronage of our products. 

 Regards, 

President, Keisuke Yoshikawa
Mechanical Core Parts Div General Manager, Junichiro Akiba

Please click here to view the list of products made in Shanghai.


April 04, 2022 NEWS RELEASE

Notice : Japanese holidays

We will be closed on the following dates due to Japanese holidays.

Tokyo office, Osaka office, and Nagoya office will be closed on
April 29th, 2022 - May 5th, 2022

Yamanashi factory will be closed on
April 29th, 2022 - May 8th, 2022
  *May 6th will be the day of suspension of shipments.

Thank you for your cooperation.

 March 18, 2022 NEWS RELEASE

“New Mechanism” Torque adjustable rotary dampers are introduced

image

     The motion of hoisting up something, such as blinds, roll screens, winches is heavy when it starts to hoisting up and very light when it finishes hoisting up, depending on the own weight of the object to be hoisted. In such applications where the motion stroke is long and the braking force is highly variable, our standard rotary damper cannot keep up with the braking torque, and centrifugal brakes are typically used. However, centrifugal brakes are known for their noisy operation (sliding brake noise) and complicated mechanisms. As noise during operation is particularly disliked by users, we have decided that a new mechanism is needed to replace the centrifugal brake.

continue reading

 February 14, 2022 NEWS RELEASE

Notice: Error in the CADENAS 2D and 3D data

image

We have found some mistakes in the inner race outer diameter (N) in the CADENAS
2D and 3D data.
Please refer to our catalog to confirm the dimensions.
If you need an accurate 2D or 3D model, please contact us from our
inquiry form.
                           Please use
the CADENAS based on the above information.
                           We apologize for any inconvenience this may cause, and thank you for your cooperation.

ページ先頭へ戻る